INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS SV16 TEMPERATURE/PRESSURE BALANCING MIXING VALVE NOTES TO THE INSTALLER:1. Please leave this do
Page 2 of 8Thoroughly read all installation instructions and product safety information before beginning the installation of this product. FAILURE TO
Page 3 of 8NOTE;ALL DIMENSIONS ARE IN INCHES (MM).*Please refer to ASSE 1016-2011 for other test conditionwhich may or may not equal installe
Page 4 of 81. With installation guide 1 on the valve positionshower valve 2 so that center of inlet ports are 2” ± 3/8” (51mm ± 9.5mm) from finished
Page 5 of 81. For 2” x 6” wall construction position showervalve so that center of inlet ports are 2-1/8” ±1/2” (50mm ± 13mm) from finished wallensur
Page 6 of 81. Bonnet Removal: Figure 8. a. Close Check stops 15.b. Using snap-ring pliers with pins less than0.03”, by others, remove snap-ring 16. c
Page 7 of 8Acorn Controls Division of Acorn Engineering Company®, A member of Morris Group International™Manual #7802-116-000 Date: 07/10/14TROUBLESH
Page 8 of 8NOTE:Individual parts not available for purchase, sold in repair kits only. Parts called out for reference only.REPAIR PARTS:Acorn Contro
Comments to this Manuals